INSTITUTE OF AVIATION MATERIALS
The Conference Program
Venue:
SSC RF FSUE “VIAM”
17, Radio str., Moscow
October 7th
General session
(Great conference hall)
Chairmen:
Evgeny N. Kablov– Academician of RAS, Professor, Dr.Eng.Sc.,
Director General of the SSC RF FSUE “VIAM”
Andrey N. Silkin – Director General of the JSC “ORPE Technologiya named after A. G. Romashin”, SSC RF
Deputy Chairpersons:
Vladislav V. Antipov– Cand. Eng. Sc., Deputy Director General
for Science of the SSC RF FSUE “VIAM”
Mikhail M. Bakradze – Cand. Eng. Sc., Deputy Director General
for metallic materials of the SSC RF FSUE “VIAM”
|
09:00–10:00 |
Registration of Participants |
|
10:00–10:15 |
Opening of the Conference. Welcome speech
Academician of RAS, Professor, Dr.Eng.Sc. (SSC RF FSUE “VIAM”) |
|
10:15–10:45 |
Welcome speech
Academician of RAS, Professor, D.Ch.Sc. (the Military-Industrial Commission of the Russian Federation) |
|
Welcome speech
Academician of RAS, Professor, Dr. Phys.-Math.Sc. (FSBI “the Russian Academy of Sciences”) |
|
|
Welcome speech
Marat A. Kambolov (NRC “Kurchatov Institute”) |
|
|
Welcome speech
Vadim V. Medvedev (Department of Innovations and Advanced Studies of the Ministry ofScience and Higher Education of the Russian Federation) |
|
|
Welcome speech
Cand. Eng. Sc.Vladimir D. Goreglyad (Department of Aircraft Industry of the Ministry for Industry and Trade of the Russian Federation) |
|
|
Welcome speech
Andrey B. Shevchenko (State Atomic Energy Corporation “Rosatom”) |
|
|
Welcome speech
Professor, Dr.Eng.Sc.Yury N. Koptev (State Corporation "Rostec") |
|
|
Welcome speech
Dr.Eng.Sc.Sergey S. Korotkov (PJSC “United Aircraft Corporation”) |
|
|
Welcome speech
Cand. Eng. Sc.Aleksandr V. Artyukhov (JSC “UEC”) |
|
|
Welcome speech
Cand. Eng. Sc.Nikolay S. Pavlenko (JSC “Russian Helicopters”) |
|
|
Welcome speech
Igor A. Arbuzov (JSC "NPO Energomash named after academician V.P. Glushko") |
|
|
Welcome speech
Corresponding Member of RAS, Professor, Dr.Eng.Sc. (JSC “UEC-Aviadvigatel”) |
|
|
Welcome speech
Academician of RAS, Professor, Dr. Phys.-Math.Sc. Vladislav Ya. Panchenko (Russian Foundation for Basic Research) |
|
|
|
Welcome speech
Director General Andrey N. Silkin (JSC “ORPE Technologiya named after A. G. Romashin”) |
|
10:45–11:15 |
Additive Technologies: the Present and the Future
Academician of RAS, Professor, D.Eng.Sc (SSC RF FSUE “VIAM”) |
|
11:15–11:30 |
Prospects for the development of additive technologies for manufacturing of ceramic materials-made products
Professor, Dr.Eng.Sc. Mikhail Yu. Rusin (JSC “ORPE Technologiya named after A. G. Romashin”), Cand. Phys.- Math. Sc. М.G. Lisachenko |
|
11:30–11:45 |
Directions and programs of activities for the development of additive technologies of the State Atomic Energy Corporation Rosatom as part of Strategy of development of additive technologies in the Russian Federation
Professor, Dr.Eng.Sc. Aleksey V. Dub (JSC “Science and Innovations”), A.N. Bykov, Cand. Phys.- Math. Sc. I.A. Ivanov, V.A. Korolev |
|
11:45–12:00 |
Implementation of the laser metal deposition technology into domestic industry
Dr.Eng.Sc. Gleb A. Turichin (FSUE of Higher Education, the “State Marine Technical University” (SMTU)), Cand. Eng. Sc. E.V. Zemlyakov, Cand. Eng. Sc. O.G. Klimova-Korsmik, |
|
12:00–12:15 |
Additive technologies for production of biodegradable medical items – problems and prospects
Cand. Phys.- Math. Sc. Timofey E. Grigoriev (FSBINational Research Center “Kurchatov Institute”), Cand. Phys.- Math. Sc. N.G. Sedush, А.Е. Krupnin, D.Ch. S.N. Chvalun |
|
12:15–12:30 |
Strategy of the Center for additive technologies of the State Corporation “Rostec”
Vladislav O. Kochkurov (JSC “ATC”) |
|
12:30–13:30 |
Lunch time |
Section №1
(Great conference hall)
“Research and development of metallic materials for additive technologies”
Section chairman:
Mikhail M. Bakradze – Cand. Eng. Sc., Deputy Director General
for metallic materials of the SSC RF FSUE “VIAM”
Section co-chairman:
Svyatoslav V. Nerush – Head of Scientific-Research Bureau “Technologies of powder metallurgy, additive production, welding, protective and special high-temperature coatings and materials”
of the SSC RF FSUE “VIAM”
|
13:30–13:45 |
Stochastic binarization of crystallographic orientation – main factor determining the fine structure of a track and formation of structure in heat-resistant alloys obtained by the SLS technology
Cand. Eng. Sc. Aleksandr G. Evgenov (SSC RF FSUE “VIAM”), Dr.Eng.Sc. N.V. Petrushin, S.V. Shurtakov, P.N. Medvedev, Cand. Phys.- Math. Sc. D.V. Zaytsev |
|
13:45–14:00 |
Femtosecond and nanosecond pulses for additive laser technologies: sintering, melting and shock waves, influence on structure and mechanical properties
Corresponding Member of RAS, Dr. Phys.-Math.Sc. Nail’ A. Inogamov (Landau Institute for Theoretical Physics, RAS), Cand. Phys.- Math. Sc. S.I. Ashhitkov, Cand. Phys.- Math. Sc. V.V. Zhakhovsky, |
|
14:00–14:15 |
Manufacturing of items from Ti–6Al–4V alloy by means of wire-feed electron-beam additive technology
Professor, Dr. Phys.- Math.Sc. Aleksey V. Panin (FSBISc, Institute of Strength Physics and Materials Science of Siberian Branch of Russian Academy of Sciences), Cand. Phys.- Math. Sc. S.А. Martynov, Cand. Eng. Sc. М.S. Kazachenok, |
|
14:15–14:30 |
Study of parameters of laser metal deposition and further treatment for obtaining of a faultless structure of the material from heat-resistant alloy KhN50VMTYuB (EP648)
Aleksey M. Khakimov (JSC “UEC” branch “NIID”), Cand. Eng. Sc. S.S. Zhatkin |
|
14:30–14:45 |
Influence of process conditions on the geometry of tracks and depth of fusion penetration in the direct laser deposition
Cand. Phys.- Math. Sc. Yury N. Zavalov (Institute on Laser and Information Technologies of the Russian Academy of Sciences – branch of the FSRC "Crystalography and photonics"), Cand. Phys.- Math. Sc. А.V. Dubrov, P.S. Rodin, Е.S. Makarova, I.M. Ivanov |
|
14:45–15:00 |
Manufacturing of composite products with a metallic matrix by means of selective laser sintering
Anna V. Kolchanova (The Bauman Moscow State Technical University, FSUE of Higher Education), А.G. Grigoriyants, D.S. Kolchanov |
|
15:00–15:30 |
Coffee break |
|
15:30–15:45 |
Development of additive technologies in the State Corporation “Rostec”
Vladimir S. Marshov (JSC “Additive Technologies Center”) |
|
15:45–16:00 |
Some aspects of training of specialists in digital and additive technologies in conditions of industrial digitalization
Vadim V. Smirnov (Ufa State Aviation Technical University, FSUE of Higher Education), Cand. Eng. Sc. S.V. Novikov |
|
16:00–16:15 |
Microstructure and mechanical properties of Cu–0,8%Cr alloy obtained by selective laser sintering
Cand. Eng. Sc. Yury Yu. Kaplansky (SSC RF FSUE “VIAM”), А.V. Peskova, Cand. Eng. Sc. М.М. Bakradze, S.V. Nerush, |
|
16:15–16:30 |
Influence of thermal treatment on changing of structure and mechanical properties of AlSi10Mg type aluminium alloys obtained by selective laser sintering
Il’yas Benarieb (SSC RF FSUE “VIAM”), N.V. Dynin, Cand. Eng. Sc. М.S. Oglodkov |
|
16:30–16:45 |
Examination of fracture pattern of AlSi10Mg alloy samples obtained by selective laser sintering
Yuliya N. Rozhkova (FSUE “Dukhov Automatics Research Institute (VNIIA)”), Cand. Ch. Sc. S.А. Fedotov, I.S. Markov |
|
16:45–17:00 |
Theoretical and experimental research of residual internal stress in the 09G2S steel samples obtained by means of a laser 3-D printer
Dr. Phys.- Math.Sc.Nataliya V. Kazantseva (“M.N. Mikheev Institute of Metal Physics of the Ural Branch of the Russian Academy of Sciences”, FSBISc), А.А. Isupova, Cand. Eng. Sc. L.Yu. Egorova, Yu. N. Koemets, Dr. Phys.- Math.Sc. А.P. Nichipuruk |
|
17:00–17:15 |
Influence of the growing directions on distribution of residual stresses in AISI 316L steel prisms obtained by selective laser sintering
Ivan D. Karpov (FSBI National Research Center “Kurchatov Institute”), D.I. Sukhov, N.A. Khodyrev |
|
17:15–17:30 |
High-temperature fatigue of a heat-resistant Co–Cr–Ni–W–Ta alloy obtained by selective laser sintering
Petr V. Ryzhkov (SSC RF FSUE “VIAM”), Cand. Eng. Sc. D.I. Sukhov, I.А. Khodinev |
|
17:30–17:45 |
Study of influence of temperature on structure, hardness, thermal stability and phase transitions of Kh16N4D4B steel used for manufacturing of parts by additive technologies
Yury A. Grishin (FSUE “RFNC-VNIITF”), L.V. Svintsova, O.N. Koroleva, M.S. Kolchina, M.S. Pisarev |
|
17:45–18:00 |
Comparison of structure and properties of EP648 alloy as cast and obtained by SLS
Cand. Eng. Sc. Sergey A. Naprienko (SSC RF FSUE “VIAM”), Cand. Phys.- Math.Sc. P.N. Medvedev, Cand. Eng. Sc. D.V. Zaytsev, А.M. Rogalev |
|
18:00–18:15 |
Discussion. Decision-making |
Section №2
(Blue hall)
“Nondestructive Testing technologies, Software and equipment for additive production”
Section Chairman:
Aleksey V. Dub –Professor, Dr.Eng.Sc., First Deputy Director General of the JSC “Science and Innovations”
Section Co-Chairman:
Pavel B. Mazalov – Deputy Head of Scientific-Research Bureau “Technologies of powder metallurgy, additive production, welding, protective and special high-temperature coatings and materials”
of the SSC RF FSUE “VIAM”
|
13:30–14:00 |
Current Status and Application Prospects of Electron Beam Additive Technology
Dr. Wenbin Kan (QuickBeam Tech. Co., Ltd) |
|
14:00–14:15 |
Nondestructive testing for quality assumption of metal parts for aerospace made by additive technologies
Olga A. Krupnina (SSC RF FSUE “VIAM”), Cand. Eng. Sc. А.S. Generalov, А.А. Demidov |
|
14:15–14:30 |
Predictive analytics for quality control of additive manufacturing products. Hardware and software platform as a base for unitized solution
Cand. Phys.- Math. Sc. I.А. Ivanov (JSC “CNIITMASH”), Dr.Eng.Sc. А.V. Dub, Dr.Eng.Sc. V.V. Orlov, А.V. Yudin, V.А. Korolev, S.S. Zherbakov, V.B. Sinilschikov |
|
14:30–14:45 |
Virtual 3-D printer – base of domestic complex software for simulation of multiscale processes of additive production within the implementation of Development Strategy for additive technologies in the Russian Federation
Cand. Phys.- Math. Sc. A.N. Bykov (FSUE“RFNC-VNIIEF”), Dr.Eng.Sc. А.V. Dub, Cand. Phys.- Math. Sc. V.V. Popov, Dr. Phys.-Math.Sc. M.D. Krivilev, Cand. Phys.- Math. Sc. B.V. Potapkin, Cand. Phys.- Math. Sc. I.V. Tsivilsky, Dr. Phys.-Math.Sc. I.V. Shishkovsky, Dr. Phys.-Math.Sc. K.Yu. Khramov, Cand. Phys.- Math. Sc. А.А. Knizhnik |
|
14:45–15:00 |
NSI X-ray computed tomography application during development of digital twins of parts obtained by additive technologies
Sergey V. Legkonogikh (LLC “Melytec”) |
|
15:00–15:30 |
Coffee break |
|
15:30–15:45 |
Characteristic features of internal structure of metal materials obtained by SLS
Cand. Eng. Sc. Eva A. Lukina (SSC RF FSUE “VIAM”), Cand. Eng. Sc. S.A. Naprienko, D.V. Zaytsev |
|
15:45–16:00 |
Acceleration of additive production by means of integrated platform 3DEXPERIENCE
Aleksey S. Siversky (JSC “IGA Technologies”) |
|
16:00–16:15 |
Homeland additive equipment and technologies
Dr.Eng.Sc. Aleksandr G. Grigoriants (The Bauman Moscow State Technical University, FSUE of Higher Education), Cand. Eng. Sc. D.S. Kolchanov, Cand. Eng. Sc. А.А. Drenin |
|
16:15–16:30 |
Bruker analytical equipment for examination of materials obtained by additive technologies
Mark V. Zhelezhnyi (LLC “Melytec”) |
|
16:30–16:45 |
Development of industrial additive equipment and invention of its mass-production at the State corporation “Rosatom”
Pavel V. Ladnov (LLC "Rusatom - Additive Technology), Dr.Eng.Sc. А.V. Dub, Dr.Eng.Sc. V.V. Orlov, M.A. Turundaev, V.А. Korolev, Cand. Phys.- Math. Sc. I.А. Ivanov, А.V. Baraev, А.V. Yudin, I.Yu. Mikhailov |
|
16:45–17:00 |
Methods of quality increase and control certainty in the line of additive equipment for SLS by LLC “Laser Systems”
Boris V. Bychkov (LLC “Laser Systems”), S.S. Smolentsev |
|
17:00–17:15 |
“Modern additive technologies for aviation industry”. ExOne – 3D-printing of sand forms, ExOne – 3D-printing with metal powders (analogue of MIM), Intamsys – 3D-printing with high-temperature polymers
Nikita V. Kislov (JSC “Z-Axis”) |
|
17:15–17:30 |
3DMP® – wire cladding for industrial use
Dmitry S. Trubashevsky (JSC “DDM Lab”) |
|
17:30–17:45 |
TETA equipment for electron-beam additive technologies
Cand. Phys.- Math. Sc. Igor V. Osipov (LLC “TETA”), А.G. Rau, G.V. Semenov |
|
17:45–18:00 |
Computer simulation of additive process of plasma-arc melting
Cand. Eng. Sc. Sergey A. Korolev (The Bauman Moscow State Technical University, FSUE of Higher Education), Dr.Eng.Sc. N.V. Kobernik, Cand. Eng. Sc. А.S. Pankratov, T.Yu. Brailovsky |
|
18:00–18:15 |
Simulation of additive production processes (SLM, DEDw, DEDp, FDM, FGF). Compensation of process-induced distortion
Aleksey I. Kurchev (LLC “Innfocus”), K.V. Fetisov, А.S. Belousov |
|
18:15–18:30 |
Simulation of 3D-printing by DED method in Ansys solutions
Denis V. Kondratiev (LLC “CADFEM Ansys”) |
|
18:30–18:45 |
Discussion. Decision-making |
October 8th
Section №3
(Great conference hall)
“Research and development of polymer, ceramic and composite materials for additive technologies”
Section Chairman:
Maksim G. Lisachenko – Cand. Phys.- Math. Sc., Head of R&D laboratory for development of materials on the basis of nitrides, carbides and borides for rocket engineering products
JSC “ORPE Technologiya named after A. G. Romashin”, SSC RF
Section Co-Chairman:
Aleksandr G. Evgenov – Cand. Eng. Sc., Head of laboratory division “Powder metallurgy and additive manufacturing”
SSC RF FSUE “VIAM”
|
09:00–10:00 |
Registration of Participants |
|
10:00–10:15 |
Application prospects of additive technologies for production of ceramic materials
Cand. Eng. Sc.Anna S. Chainikova (SSC RF FSUE “VIAM”), А.А. Kachaev, Cand. Ch. Sc. V.A. Voronov, P.B. Mazalov, Cand. Eng. Sc. Yu. E. Lebedeva |
|
10:15–10:30 |
Special aspects of production of items from reaction bonded silicon nitride using the layerwise extrusion of a thermoplastic slip
Ilya G. Mikhailov (JSC “ORPE Technologiya named after A. G. Romashin”, SSC RF), V.S. Zaytsev, Cand. Phys.- Math. Sc. А.О. Zabezhailov, Cand. Phys.- Math. Sc. М.G. Lisachenko |
|
10:30–10:45 |
Stereolithographic formation of bio-ceramics: problems and prospects
Cand. Ch. Sc. Valery I. Putlyaev (Federal State Budgetary Educational Institution of Higher Education “M.V. Lomonosov Moscow State University”), Cand. Ch. Sc. P.V. Evdokimov, Cand. Ch. Sc. А.V. Garshev, Cand. Ch. Sc. Ya.Yu. Filippov |
|
10:45–11:00 |
Using of additive technologies in production of complex ceramic items with geometry of triply periodic minimal surface (TPMS)
Sergey V. Balabanov (Institute of Silicate Chemistry, Russian Academy of Sciences (ISC RAS)), Dr.Eng.Sc. S.N. Perevislov, Dr.Eng.Sc. М.М. Sychev |
|
11:00–11:15 |
3D-printing of non-oxide ceramic materials for space application
Ilya Yu. Kononykhin (LLC “SIU System”) |
|
11:15–11:30 |
Biomedical requirements for technologies of 3D-printing of implantable devices
Cand. Bio. Sc. Ilya D. Klabukov (National Medical Research Radiological Centre of the Ministry of Health of the Russian Federation), Cand. Med. Sc. P.V. Shegai, Academician of RAS, Dr. Med. Sc. A.D. Kaprin |
|
11:30–11:45 |
Rheology and kinetics of polymerization of ZrO2 and YAG-based suspensions for 3D-printing
Lidiya V. Ermakova (Institute for Chemical Reagents and High Purity Chemical Substances of NRC “Kurchatov Institute” - IREA), V.G. Smyslova, Cand. Ch. Sc. D.E. Kuznetsov, P.V. Karpyuk, Cand. Ch. Sc. P.S. Sokolov |
|
11:45–12:00 |
Development of composite materials for manufacturing of durable and heat-resistant complex products by additive technologies
Cand. Ch. Sc. Anton S. Egorov (FSBI National Research Center “Kurchatov Institute”), M.V. Bogdanovskaya, D.S. Aleksandrova, Dr. Ch. Sc. Ya. S. Vygodsky, V.S. Ivanov, E.V. Ivanov |
|
12:00–13:00 |
Lunch. Coffee break |
|
13:00–13:15 |
Assessment of tendency to distortion of parts produced by SLS technology based on rheological studies of PA-12-based polymer powder compositions
Cand. Phys.- Math. Sc. Dmitriy A. Gurov (SSC RF FSUE “VIAM”), Dr.Eng.Sc. S.V. Kondrashov, S.А. Larionov, А.R. Ogrmtsyan, D.D. Naidenov, N.А. Khodyrev, Cand. Ch. Sc. М.А. Guseva, Cand. Eng. Sc. А.Е. Sorokin |
|
13:15–13:30 |
Polymer materials in additive technologies. Current state and development potential in the Russian Federation
Professor, Dr. Ch. Sc. Svetlana Yu. Khashirova (Federal State Budgetary Educational Institution of Higher Education “Kabardino-Balkar State University named after H.M. Berbekov”), Dr. Ch. Sc. E.R. Badamshina |
|
13:30–13:45 |
Technology of additive production of items with three-dimensional reinforcement with continuous fiber
Ilya A. Guschin (Federal State Budgetary Educational Institution of Higher Education “Volgograd State Technical University”), I.S. Torubarov, Cand. Eng. Sc. А.V. Drobotov, |
|
13:45–14:00 |
Processing properties of composite filaments for 3D-printing on the basis of high performance thermoplastics and discontinuous fibers
Cand. Eng. Sc. Ismel V. Musov (Federal State Budgetary Educational Institution of Higher Education “Kabardino-Balkar State University named after H.M. Berbekov”), А.А. Slonov, АА. Zhansitov, Professor, Dr. Ch. Sc. S.Yu. Khashirova |
|
14:00–14:15 |
Examination of polymer materials’ processing parameters used in investment casting by FDM technology using the additive manufacturing machines
Ivan S. Ermakov (JSC “UEC-Kuznetsov”) |
|
14:15–14:30 |
Composites on the basis of superengineering thermoplastics for 3D-printing
Cand. Eng. Sc. Azamat L. Slonov (Federal State Budgetary Educational Institution of Higher Education «Kabardino-Balkar State University named after H.M. Berbekov”), Cand. Eng. Sc. I.V. Musov, Cand. Ch. Sc. А.А. Zhansitov, Professor, Dr. Ch. Sc. S.Yu. Khashirova |
|
14:30–14:45 |
Influence of rheological properties of partially crystalline polymers on the quality of their printing by FDM method
Dr.Eng.Sc. Stanislav V. Kondrashov (SSCRFFSUE“VIAM”), S.А. Larionov, Cand. Phys.- Math. Sc. D.S. Gurov, |
|
14:45–15:00 |
Synthesis and properties of polyether-ketones for 3D-printing
Cand. Ch. Sc. Azamat A. Zhansitov (Federal State Budgetary Educational Institution of Higher Education «Kabardino-Balkar State University named after H.M. Berbekov”) |
|
15:00–15:15 |
Discussion. Decision-making |
Section№ 4
(Blue hall)
“Characteristic features of development of metal powder compositions’ manufacturing and examples of products on the basis of additive production”
Section Chairman:
Svyatoslav V. Nerush – Head of Scientific-Research Bureau “Technologies of powder metallurgy, additive production, welding, protective and special high-temperature coatings and materials”
of the SSC RF FSUE “VIAM”
Section Co-Chairman:
Pavel B. Mazalov – Deputy Head of Scientific-Research Bureau “Technologies of powder metallurgy, additive production, welding, protective and special high-temperature coatings and materials”
of the SSC RF FSUE “VIAM”
|
09:00–10:00 |
Registration of participants |
|
10:00–10:15 |
Features of development of manufacturing technologies of structural parts of small-sized gas turbine engines
Konstantin I. Svetogorov (SSC RF FSUE “VIAM”), P.B. Mazalov, S.А. Tarasov, А.I. Pashkov, S.V. Belyakov, А.V. Peskova |
|
10:15–10:30 |
Examination of dynamic characteristics of structures made by additive technologies by FDM method from different materials
Evgeny A. Belanovich (JSC “MIC “Mashinostroyenia”), M.Yu. Logunenko, V.E. Kuklin, А.S. Ermilov |
|
10:30–10:45 |
Production of forcers’ lip-type sealings by 3D- and 5D-printing
Ivan S. Torubarov (Federal State Budgetary Educational Institution of Higher Education “Volgograd State Technical University”), Cand. Eng. Sc. А.V. Drobotov, I.A. Guschin, |
|
10:45–11:00 |
3D-printing during the development of structures with radar-transparent properties
Anton Yu. Balashov (JSC “MIC “Mashinostroyenia”), N.Kh. Gyulmagomedov, А.S. Ermilov |
|
11:00–11:15 |
Russian solution for topological optimization of structures in the products of Research and Software Development Centre “APM” and ASCON Group.
Sergey M. Rozinsky (Research and Software Development Centre “APM”, Ltd.), Cand. Eng. Sc. V.S. Prokopov |
|
11:15–11:30 |
Topological optimization as part of complex solution of the Hexagon Company for additive technologies
Aleksey P. Gontyuk (JSC “MSC Software Rus”) |
|
11:30–11:45 |
Mathematical model of plasma spheroidization of powder particles
Anton S. Melnikov (Federal State Budgetary Educational Institution of Higher Education “Kazan National Research Technical University named after A. N. Tupolev – KAI”), Cand. Eng. Sc. I.V. Tsivilsky |
|
11:45–12:00 |
Plasma spheroidization of composite granules on the basis of intermetallic nickel
Andrey P. Bobrovsky (SSC RF FSUE “VIAM”), R.S. Kuptsov, I.Yu. Efimochkin, Cand. Eng. Sc. А.V. Samokhin |
|
12:00–13:00 |
Lunch. Coffee break |
|
13:00–13:15 |
Degradation (change) of mechanical properties of synthesized material depending on cross contamination and cycling of re-use of reverse powders during the SLS process
Sergey V. Shurtakov (SSC RF FSUE “VIAM”), Cand. Eng. Sc. А.G. Evgenov, I.A. Khodinev, S.V. Prager, R.Yu. Malinin |
|
13:15–13:30 |
Production of high quality spherical metal powder by atomization with noble gas
Nikita A. Chebykin (ALD Vacuum Technologies GmbH), Dr. Christian Lehnert |
|
13:30–13:45 |
Influence of electromechanical processing on structure, chemical composition and physical and mechanical properties of plasma-sprayed Ni–Nb coating
Cand. Eng. Sc.Aleksandr Yu. Ivannikov (Baikov Institute of Metallurgy and Materials Science RAS) |
|
13:45–14:00 |
Application of metal powders by JSC “Polema” in additive manufacturing
Pavel S. Marusin (JSC “Polema”) |
|
14:00–14:15 |
Production of metal powder for 3D-printing by Grancom LLC
Cand. Eng. Sc.Aleksey I. Demchenko (Grancom LLC), A. I. Andreyko, А.А. Maksimov |
|
14:15–14:30 |
Discussion. Decision-making |
Round Table
Of Technical committee for standardization of TC 182 “Additive Technologies”
(Presidium hall, STC, 10:00 – 12:00)
Chairpersons:
Olga G. Ospennokova – Dr.Eng.Sc.,Deputy Director General of
SSC RF FSUE “VIAM”
Aleksey V. Dub –Professor, Dr.Eng.Sc., First Deputy Director General of the JSC “Science and Innovations”
Membership: subcommittee chairpersons, authorized representatives, member and observer organizations of TC 182.
Meeting Agenda
|
№
|
Action item / |
Assigned person/ spokesperson |
|
1. |
Opening of session of TC 182 |
Olga G. Ospennikova, Deputy Director General of SSC RF FSUE “VIAM”, co-chairperson of TC 182; Aleksey V. Dub, |
|
2. |
General information on the work of TC 182 |
Elena L. Pakhomova, |
|
3. |
Report on subcommittees performance |
Subcommittee chairpersonsof TC182 |
|
4. |
Information on fulfillment of development program of national standards for 2019, 2020 and 2021
|
Ilya A. Pronin, |
|
5. |
Discussion of long-range program of TC 182 for 5 years (as per GOST R1.1.–2020 |
Participants of the meeting of TC 182 |
|
6. |
Standardization in the field of additive technologies at international level |
Ivan A. Kosorukov, |
|
7. |
Other reports and issues upon suggestions of member and observer organizations of TC 182 |
Participants of the meeting of TC 182 |
|
8. |
Summing-up the meeting of TC 182 |
Olga G. Ospennikova, Deputy Director General of SSC RF FSUE “VIAM”, co-chairperson of TC 182; Aleksey V. Dub, |